Maberry Centre Bat Homes
"Bridge Condo"
Dimensions: 26 1/2" height x 20 1/4" width x 38" length
Weight: approx. 210 lbs.
Capacity: Designed for 2,000 + bats -- depending on species
Construction: Factory galvanized steel, durable PVC plastic, polypropylene black webbing, stainless steel rivets & stucco (inside), cadmium plated hardware (exterior), stainless available.
Miscellaneous: Roosting area contains 728 feet (both sides of webbing). Louvered vents & attic passageways provide maximum air circulation.

 

 The "Bridge Condo" is designed as a hanging unit, (as shown in the left side photo above), and features a factory galvanized welded steel outer shell with louvered vents,  for air circulation. The right side  picture is the bottom view of the inside (PVC) plastic insert. It shows the numerous compartments with polyproplyene webbing attached with stainless steel rivets. This results in  abundant roosting space and for the future growth of the colony.
 It is designed to accommodate approximately 2000 + bats, depending upon species, and can be utilized under a bridge, other structure or as a free- standing outside unit.
Price: $4,215.00

Call for shipping rates (to your job site zip code). Sales tax where applicable.

 

The vents, on each side, near the top, are located on opposite ends and allow for maximum air circulation.  Units may be special ordered without vents, (for colder climate areas), if desired.  Please specify when ordering. Occupants can move throughout the entire habitat through the many passageways.

 ( Interior Features)

The inside (PVC) plastic insert consist of seven "PI" bat houses  secured together.  Insulation is sandwiched, on the top, and between the outside and inside walls to stabilize the inside temperature.



 Picture at left illustrates one of the seven "PI" sections that complete the inside of the "Bridge Condo" insert, showing the large attic and access spaces to the various compartments. The attic design allows air flow throughout, while providing  an additional temperature range for the occupants in this nursery habitat. Webbing allows the bats to easily move in and around the entire area and provides for additional room. The recessed webbing (bottom) makes a convenient and safe inside landing area. The "PI" house has proven its success throughout the United States, and is rated  "Bat Approved" by Bat Conservation Int.


  

Mounting Instructions:		  

 
Mounting under a bridge or other structure, the unit should be a minimum of 10 feet from the ground to the bottom of the house, more is better. Position the open end down (for the bats to enter and exit). To attract bats to the new house(s) we offer some suggestions:
Don't have underbrush within 15 feet from the bottom of the house(s).

Have a clear flight path to the house(s)

Have the location safely above the high water level.

The mounting eye bolts may be turned, if desired.

Shipping weight of bat house strapped on pallet is approx. 249#. 



Feel free to call (903) 645-7780 (office) or (903) 645-2028 (shop and residence), cell phone (903) 767-6731, or email marvin@maberrybat.com if you need our assistance. Also, please advise when you first observe bats in your home.






  
Copyright © 2002 - 2010 - Maberry Centre Bat Homes - All Rights Reserved

1407 Maberry Rd. Daingerfield, TX 75638
(903) 645-7780 Office - (903) 645-2028 Shop
(903) 645-3699 Fax
Fed. Tax ID # 75-2440657